Home security checklist

Home security: where to start

Start with the entrances and windows someone could actually reach, then decide how you will detect a break-in and respond. A reinforced door buys time, an alarm signals what has happened, and a person or monitoring centre acts on the information. Choose measures that work together and suit the way you live.

Home-jacking.com editorial teamUpdated 4 November 20266 min readSources

How much should you budget for the first improvements?

Start with the problem you need to fix. Replacing a lock cylinder, fitting a window grille and replacing a whole door are different jobs. Choose one vulnerable entry point and find out what it would cost to put right before adding electronic equipment.

Start with a walk around your home

Walk around the outside of your home. Check the front entrance, garage, side doors, patio doors, low windows and any entry points within reach of a balcony or roof. Check the same doors and windows from inside. Note which ones do not shut properly, are hard to operate or often get left unlocked.

Use what you find to set priorities. If a side door is in poor condition, you may have little to gain by replacing a recently fitted front door. A camera above a door with a broken lock will not fix the lock.

Use our home security assessment guide to turn your notes into a list of jobs in order of priority. Write down each fault, the proposed repair and who will do it. You can then ask installers to quote for the same work.

What each security measure can do

On a small screen, scroll the table horizontally.

Where each protection helpsWhere each protection helps 1. Control access. Front door and visitors. Locks, checking callers and managing keys. 2. Delay entry. Reinforced doors, windows and locking hardware. 3. Detect. Opening contacts, movement sensors, shock sensors or outdoor detectors. 4. Verify and raise the alarm. Useful footage, named contacts and professional alarm monitoring. 5. Protect the people at home. Agreed instructions, routes through the home and a place to shelter near the bedrooms. Look at the home as a whole.123451Control accessFront door and visitors.Locks, checking callers andmanaging keys.2Delay entryReinforced doors, windows andlocking hardware.3DetectOpening contacts, movementsensors, shock sensors oroutdoor detectors.4Verify and raise the alarmUseful footage, named contactsand professional alarmmonitoring.5Protect the people at homeAgreed instructions, routesthrough the home and a placeto shelter near the bedrooms.
Look at the home as a whole.
Purpose Examples Intended outcome
Control access Locks, checking visitors and managing keys Keep entry points secure and check a caller’s story before opening the door
Delay entry Reinforced doors, windows and locking hardware Provide a physical barrier with documented resistance to forced entry
Detect Door and window contacts, movement sensors, shock sensors or outdoor detectors Signal the events the sensors are set up to detect in the areas they cover
Verify an alert and raise the alarm Relevant footage, named contacts and professional alarm monitoring Find out what happened and put the agreed response into action
Protect the people at home Agreed instructions, routes through the home and a place to take shelter Avoid confrontation and make it easier to call for help

Use the table to look for gaps. Several cameras may give a good view of an incident, yet nobody may know who should handle the alert. Even a strong front door offers little help if an accessible window is open. Look at the home as a whole.

Strengthen weak doors and windows

Resistance to forced entry depends on the whole assembly, including the panel or glazing, frame, lock, hinges and fixings. Ask for a quote that addresses the fault you found and gives evidence for the performance claimed. The number of locking points alone does not tell you the resistance class of the complete door.

The guide to doors and windows explains the available reinforcement and replacement options. RC classes and certification help you compare products with documented performance. They cannot guarantee how long someone would take to get into your home.

Keep your home comfortable to use and make sure people can still get out. Equipment that makes everyday life difficult may end up left open or unlocked. The design must preserve escape routes and any required fire protection.

For an accessible window, your choice of security grille depends on the supporting structure, how you use the window and how people would get out.

Choose an alarm you can use while you are at home

An alarm that runs at night should let people use the areas they need. Opening sensors on doors and windows can work alongside motion detectors in unoccupied rooms. Set night mode around the routes your household actually uses.

Ask what triggers detection: a window opening, an impact on a surface or someone entering an area. These happen at different stages. A perimeter alarm can monitor doors and windows. Outdoor detection serves a different purpose, picking up movement on the grounds beforehand.

Check what happens during an outage. Power to the control panel and transmission of alerts are separate matters. A backup battery does not automatically power every device on your home network.

Also ask what still works during a power cut or internet outage and how the system handles a panic button activation.

Decide who will respond to an alert

A phone notification is only useful if someone reads it. Agree who receives alerts, who acts as backup and what each person should do. To delegate the response, choose an alarm monitoring service whose contract explains how operators verify alerts and what happens next.

A technical subscription does not replace a human response. Ask the provider to distinguish mobile connectivity, image storage and handling by an operator. Family or friends listed as contacts should never be asked to enter a home where a break-in is suspected.

You could also consider a secure sleeping area or a safe room. Each needs its own plan, beyond the choice of detectors. Consider how the household uses the space, how it is protected and how people would communicate and get out.

Allocate the budget in stages

Fictional example. A family finds that their side door is damaged, their patio door closes properly and they rarely set the alarm because it goes off on the way to the bathroom at night. They repair the side door and change the night settings first. They will consider a camera later if there is something they need to check visually. Buying a new alarm kit would leave both problems unresolved.

Swiss Crime Prevention recommends combining everyday precautions with security equipment. Start with your household routines, then obtain quotes for jobs that need a professional.

Before committing money, ask for a plan, product references and handover tests. The comparison of security quotes must cover the same work. If a specific threat to someone has been identified, a wider security assessment must take account of your family, the information people can find and your movements.

Guides to individual security measures

Choose the topic that fits your next decision. Each guide explains what to check, what to compare and what to do next.

Sources and references

These are the documents used in this guide.

  1. Swiss Crime Prevention guidance on burglary Prevention advice and contact details for the relevant services.