Budgeting for each door and window
Compare the cost per opening. A new cylinder will not strengthen a weak frame, and stronger glass cannot replace a patio door’s locking mechanisms. Price each opening separately. Ask what needs removing and what finishing or making good the quote includes.
Start with entrances and windows within reach
Walk around your home, first outside and then inside. Look at the front door, the door from the garage into the house, the patio door facing the garden, cellar windows and any openings within reach of a balcony or low roof. A first-floor window above a low roof, for example, may be easier to reach than the floor number in a property listing suggests.
For each opening, check its condition, how it locks and whether you actually keep it closed when you rely on it for protection. Even with reinforced fittings, a window left ajar is outside the configuration in which its resistance was assessed. If a door sticks and the family avoids locking it, start by having it adjusted.
These checks can help you decide where to spend first. If the front door is fairly new and a side door is in poor condition, repairing the side door may improve security more than replacing the front door. Use our home security assessment guide to record what you find.
How the door, frame and lock work together
The leaf is the moving part of the door and the frame is fixed to the wall. The locking points engage with strike plates attached to that frame. A thick-looking panel is of little use unless the frame, keeps and fixings are strong too. A multipoint lock secures the door in several places, but the number of locking points is not an overall security rating.
Ask the installer to list the proposed work on the door panel, frame, hinges and lock separately. If the frame is in poor condition or the door cannot provide the required resistance, consider replacing the whole doorset. Our guide to security doors explains when replacement makes sense.
A flat’s entrance door also has to meet the building’s requirements for closing, fire performance and escape. Resistance to forced entry tells you nothing about those functions. Look for each one separately in the product specifications.
What to check besides the glass
Glass is one part of the system. The hardware holds the opening leaf in the frame, the strike plates receive the locking points, and the fixings attach the assembly to the building. For a sliding patio door, pay particular attention to how the panels stay in their tracks and how they lock.
Double and triple glazing describe how the panes are arranged, chiefly for insulation. It does not give a burglary resistance rating. Replacing the glass in an old window with laminated glazing does not automatically make it an RC2 window either. The stated performance must apply to the entire assembly supplied.
When upgrading an existing window, an installer might suggest compatible fittings, an extra lock or replacement glazing. Ask which weakness each change addresses. A list of accessories is of little help unless the quote explains how they work together.
A window security grille may suit some rooms. Consider how it would be fitted, how you use the opening and whether anyone needs to get out through it in an emergency.
What do RC classes and certification tell you?
An RC class under EN 1627 describes how a building component performed in a series of tests. To compare products, check that the report identifies the model, the configuration tested and where the result applies. For an explanation of the tests, see Bern University of Applied Sciences.
A doorset certificate applies to a specified assembly. Fitting a certified lock does not, by itself, certify the whole door. Ask for evidence covering the doorset you are buying; separate component labels cannot be added together to establish a rating for the complete assembly.
Match the work to the fault
On a small screen, scroll the table horizontally.
| What you find | Work to price first |
|---|---|
| The door closes poorly and the locking points fail to engage | Adjustment and checks on the frame and lock |
| The cylinder is exposed and the surrounding hardware offers little protection | A cylinder and protective escutcheon compatible with the door |
| The frame is damaged or inadequately secured | Documented repairs to the supporting structure or replacement of the doorset |
| An older patio door is loose when closed | Check the tracks, locks and fittings, then compare the cost with replacement |
| The opening has to remain available as an exit | A way to secure it that still lets people get out in an emergency |
What to test at handover
Open, close and lock each entrance with the installer. Ask everyone who will use the equipment to try it. A stiff handle or a locking sequence people do not understand can lead them to leave it unused. Keep the model references, rating documents and maintenance instructions with the invoice.
An opening sensor can alert you if someone opens a door or window. The frame and the lock provide the physical resistance that delays entry. To plan both together, see our home protection guide.
Sources and references
These are the documents used in this guide.
- Bern University of Applied Sciences on resistance testing The performance stated applies to the product or configuration described in the document.