Home security checklist

Perimeter alarm: detecting intruders before entry

An alarm’s perimeter zone monitors the building envelope: the doors, windows and outside walls through which someone could enter. It differs from volumetric (space) protection, which uses motion detectors to monitor an area such as a room or terrace. Depending on the installation, perimeter monitoring uses sensors fitted to openings (contacts, shock sensors or glass-break detectors) or a narrow-beam outdoor detector mounted on an outside wall. A perimeter alarm can therefore remain active while people move around inside. Its usefulness depends on which openings are fitted with sensors, what those sensors detect and how they work in night mode.

Home-jacking.com editorial teamUpdated 5 November 20266 min readSources

What to include in the budget

Distinguish between sensors that monitor doors and windows and those that cover outdoor areas. The price of a sensor alone does not include a control panel or the work of setting up night mode. If you already have a compatible system, you mainly need to budget for the extra equipment and its setup. For a new installation, ask for the cost of the whole system.

What each type of detector senses

An opening contact monitors the position of two parts, usually one on the frame and the other on the moving door or window. It signals that they have separated according to the model and its settings. It cannot tell you how much force the door can withstand or detect everything someone might do to a window.

A shock detector reacts to particular impacts or vibrations. A glass-break detector looks for something different, such as the sound of breaking glass. A curtain detector monitors movement through a narrow strip. Knowing which event each device detects helps you see where there are gaps in cover.

On a small screen, scroll the table horizontally.

Detection Event monitored What to ask
Opening contact A door or window opens What happens if the window is already open when you set the alarm?
Shock detector An impact or vibration the sensor can detect on the surface it is mounted on Which materials can it be fitted to, and which settings do they need?
Glass breakage The signs of breakage this sensor can detect Which glazing and which area are covered?
Curtain detector Passage through a narrow area Where does the detection zone lie in relation to the opening?

Luxembourg’s Grand Ducal Police explain the different types of detector. Ask the installer to show you where each one will go in your home.

Will you receive an alert before someone gets inside?

It depends on the event the sensor detects. An outdoor detector can report movement in its zone. A shock detector may register an impact on a window or door. An opening contact reports that the door or window has opened, which may be the first warning you get. The word ‘perimeter’ alone does not guarantee advance warning.

Which event triggers the alertWhich event triggers the alert 1. Outdoor detector. Reports movement in its zone. 2. Shock detector. May register an impact on a door or window. 3. Glass-break detector. Monitors for glass breaking. 4. Opening contact. Reports that a door or window has opened. 5. Curtain detector. Monitors movement across a narrow zone. The timing depends on the event detected, so the word ‘perimeter’ does not guarantee warning before entry.123451Outdoor detectorReports movement in its zone.2Shock detectorMay register an impact on adoor or window.3Glass-break detectorMonitors for glass breaking.4Opening contactReports that a door or windowhas opened.5Curtain detectorMonitors movement across anarrow zone.
The timing depends on the event detected, so the word ‘perimeter’ does not guarantee warning before entry.

When comparing two proposals, ask at what point each sensor would react in the same scenario. This will show you what an outdoor sensor, a shock detector or a second detector indoors would add, and help you avoid paying for several sensors in the belief that they all do the same job.

Set up a night mode you can use

Night mode sets only part of the system. Some zones stay active while people can move freely through others. Door and window contacts are well suited to this. Motion detectors can also stay active in rooms no one will enter, such as a closed garage.

Map the routes people normally take at night, including bedrooms, the bathroom, the landing, the stairs and any route a pet uses to reach the garden. Check that the settings allow those movements. Agree who will unset the alarm in the morning, where they will do it and which door or window needs to stay closed until then.

Fictional example. A couple sleep upstairs and their child uses a bathroom on the same floor. At night, the downstairs door and window contacts and the garage detector stay on, while the detector on the route to the bathroom stays off. The family can set the alarm regularly without changing how they use their home.

If several bedrooms share a landing or corridor, a guide to securing the sleeping area can help you plan how people will move, communicate and get out when night mode is on.

Opening a window for fresh air with the alarm set

An open window changes what its contact can detect. Depending on the equipment and settings, the system may refuse to set, flag the open window, bypass that zone or use another sensor reading. Check which applies to your system.

Bypassing a window contact need not switch off the whole alarm, but that contact will no longer report the window opening. Another detector may still offer cover if the layout allows for it. Ask for a clear display of bypassed zones so an overlooked setting does not leave a window unprotected.

What happens after a detector is triggered?

Agree what will happen when a sensor is triggered. The system may sound a siren, send a notification, alert a monitoring centre or do several of these. People in the home should recognise the alert and know what to do. They should not be sent to investigate a possible intrusion themselves.

If you believe you are in danger, follow the guidance on what to do during a home invasion and contact the emergency services as soon as it is safe. Even if your alarm is monitored, you can report a threat without waiting for the operator to ring.

Test the system before relying on it

With the installer, test every protected opening in each mode you will use: away, home and night. Check which detector name appears, who receives the alert and what happens if a window is left open. Arrange any tests with the monitoring centre if your alarm is connected to one.

Repeat these checks after changes such as moving a bedroom, getting a pet, building work or replacing a door or window. A perimeter alarm covers the entry points where sensors are fitted and set up. For additional cover, see the guides to outdoor detection and physical security.

Sources and references

These are the documents used in this guide.

  1. Luxembourg’s Grand Ducal Police on types of detector Public source. Consult the original for its date, scope and conditions of use.
  2. Police grand-ducale, Bureau Conseil de Prévention du Crime, Prévention cambriolage, mesures mécaniques et électriques (in French).
  3. Police locale Pays de Herve, Les détecteurs extérieurs (in French).
  4. Ajax Systems, DoorProtect Plus Jeweller user manual.Opening, shock and tilt detector.