Home security checklist

House alarm: how to choose a burglar alarm

A home alarm should detect the events you want it to pick up, get a useful alert to someone and be easy to use. Start with your home and routines: which entry points need monitoring, which rooms are occupied at night, who receives alerts and whether they can respond. Compare the accessories in each kit after that.

Home-jacking.com editorial teamUpdated 10 November 20265 min readSources

How much should you budget for a house alarm?

Price the equipment, installation and ongoing service separately. If you buy a kit to fit yourself, you need to check it covers the right areas and configure it. An installed package includes the installer’s work, but additional detectors may cost extra. If you want professional monitoring, calculate its cost over the whole contract.

Decide what the alarm needs to monitor

An alarm for a house that stands empty during the day needs different settings from one you use while people sleep. In an empty house, motion detectors can cover the rooms you choose. At night, people need to be able to move around designated areas without setting the alarm off.

Perimeter detectors can monitor doors and windows. Indoor motion sensors detect movement within rooms. You can use both: door and window contacts and motion sensors in an empty garage or ground-floor room can stay active while people are upstairs. Decide how to divide the home into zones.

Sketch how you use your home. Mark your usual entrance, access to the garden, the routes people take at night, where pets go and where visiting tradespeople need access. This gives an installer more to work with than simply asking for the best alarm.

How the system works from detection to response

A detector sends a signal to the control panel. Depending on the event and the mode in use, the panel can apply a delay, sound a siren, send a notification or alert a monitoring centre. Ask which actions your setup triggers.

How an alarm worksHow an alarm works The detector leads to the control panel, then branches into three possible outputs in parallel. They lead to an agreed response, handled either by you and your named contacts or by an operator according to the contract. 1. Detector. Sends an event to the control panel. 2. Control panel. Applies the settings, active mode and any delay. 3. Siren. Sounds a warning if configured. 4. Notification. Informs its recipient if configured. 5. Transmission. To a monitoring centre if provided for. 6. You and your named contacts. Handle the response to a self-monitored alarm. 7. An operator. Acts according to the contract and instructions. A siren sounds a warning without locking a door, so the system needs an agreed response.DetectorSends an event to the controlpanel.Control panelApplies the settings, active modeand any delay.SirenSounds a warning ifconfigured.NotificationInforms its recipient ifconfigured.TransmissionTo a monitoring centre ifprovided for.You and your named contactsHandle the response to aself-monitored alarm.An operatorActs according to thecontract and instructions.
A siren sounds a warning without locking a door, so the system needs an agreed response.

A siren sounds a warning. A phone notification tells a contact something has happened, but only if they read it. You still need to lock doors and windows and agree who will respond. The guide from Luxembourg’s Grand Ducal Police explains the different roles of physical and electronic protection.

Features to choose for your household

On a small screen, scroll the table horizontally.

Need Feature to request and test
Sleep with the alarm on Part-setting that lets people move along their usual routes at night
Know when a particular door or window opens A contact sensor on that door or window, with an agreed response when it opens
Send alerts during an internet outage A suitable backup communication path that has been tested
Have someone else handle alerts An alarm monitoring contract and clear response instructions
Identify which detector triggered an alarm Clear zone names in the app and in alert messages
Manage several users Individual codes or access rights you can change and revoke

Ask for a demonstration of night mode. Try walking to the toilet, going into a bedroom and opening a door you normally use in the morning. If people routinely switch the system off to avoid false alarms, the settings need to change.

Wired and wireless alarms and what happens during an outage

Wireless equipment is easier to install in an occupied home. Wired systems work particularly well where cable routes have been planned. A hybrid system combines both. Consider the walls, outbuildings, power supply and maintenance, as explained in the comparison of wired and wireless alarms.

Check what powers the control panel and the detectors, and how the system sends alerts outside the home. A backup battery for the panel does not necessarily power your router. A SIM card provides a connection, not power. Ask which faults the system reports and what still works if each connection or power supply fails.

Grades and certifications describe defined technical requirements. Equipment certification covers identified models. Certified devices still need to be positioned and configured correctly. Ask the installer to explain how the proposed grade suits your needs and any requirements from your insurer.

Our guide to testing an alarm during a power cut or internet outage explains battery life, communication paths and how the system monitors faults. Use its table to plan tests with your installer.

Who responds to the alert?

With a self-monitored alarm, you and your named contacts handle the response. You need to receive the alert, recognise where it came from and agree what to do if nobody answers. With professional monitoring, an operator follows the contract and your agreed instructions.

A subscription may pay just for an app, storage or a mobile connection. Ask who checks an alert and who calls for help, and have the provider put that in writing. Our guide to monitored and unmonitored alarms explains the distinction.

An alert raised by someone at home also needs an agreed response. Our guide to panic buttons explains the types available, their settings and what happens when someone presses one.

What to check at handover

At handover, test the detectors, arming modes and notifications. If you have professional monitoring, also test the connection to the monitoring centre. Arrange the tests with the provider so they know there is no real emergency. Ask how to report a fault, when maintenance is due and how to remove access for someone who no longer needs it.

Keep a plan of the zones and brief instructions that everyone in the household can follow. Budget for the equipment you need, installation, communications and maintenance. The price of a starter kit means little until you know what the complete system must cover.

Sources and references

These are the documents used in this guide.

  1. Luxembourg’s Grand Ducal Police guide to burglary prevention Check the original document for its date and scope.